SoftExpert Capture service (HTTPS) |
This topic will show how to configure the SoftExpert Capture service with HTTPS protocol in port 8586.
1.Create the secaptureservice directory:
2.Access the secaptureservice directory:
3.Create the docker-compose.yml file inside the secaptureservice directory.
4.Paste the following text:
5.Find the extra_hosts parameter.
6.Insert the SE access URL and the local IP of the application server, as shown in the image below:
7.Create the cert directory:
8.Paste the .pfx certificate file to the /usr/local/se/secaptureservice/cert directory and save it with the name certificate.pfx.
9.Create the capture.env file inside the secaptureservice directory.
10.Insert the following text, indicating the port that will be used for HTTPS connection, and enter the certificate password in the CERTIFICATE_PASSWORD= parameter:
11.Start the SoftExpert Capture service using the command below:
To stop the service, execute the command below:
To check if the secaptureservice service is up, execute the command below:
12.After doing that, access the SoftExpert Document component Configuration General parameters (DC035) and point the service in the application by entering https://ServerIP:8586 in the Enable SE Capture service redirection Server field.
13.Then, run the connection text and save. |