Navigation:  »No topics above this level«

Network

 Previous  Top  Next

This section covers the information regarding the SoftExpert Suite download and upload bandwidth consumption according to the number of users in the system. It also contains information about the bandwidth consumption when the data compressing resource is enabled and when it is not.

 

ATTENTION

▪Consumption based on the normal use of the solution. For better dimensioning, we recommend a customized analysis before the implementation.

▪The requirements mentioned in this section are applicable from version 2.1.0 of SoftExpert Suite to its latest version.

 

Windows

The table below shows the SoftExpert Suite download and upload bandwidth consumption when IIS compression is and is not enabled:

Simultaneous users

Without IIS compression

With IIS compression

Download

Upload

Download

Upload

1-5 Users

250 Kbps

50 Kbps

100 Kbps

50 Kbps

6-25 Users

1.2 Mbps

300 Kbps

440 Kbps

256 Kbps

26-50 Users

2.5 Mbps

600 Kbps

880 Kbps

512 Kbps

51-100 Users

5 Mbps

1.2 Mbps

1.7 Mbps

1 Mbps

101-200 Users

10 Mbps

2.5 Mbps

3.5 Mbps

2.1 Mbps

201-600 Users

30 Mbps

7 Mbps

10.6 Mbps

6.5 Mbps

 

Linux

The table below shows the SoftExpert Suite download and upload bandwidth consumption when Apache compression is and is not enabled:

Simultaneous users

Without Apache compression

With Apache compression

Download

Upload

Download

Upload

1-5 Users

250 Kbps

50 Kbps

70 Kbps

40 Kbps

6-25 Users

1 Mbps

300 Kbps

450 Kbps

256 Kbps

26-50 Users

2.1 Mbps

540 Kbps

885 Kbps

540 Kbps

51-100 Users

4.5 Mbps

1.1 Mbps

2.5 Mbps

1.5 Mbps

101-200 Users

8.6 Mbps

2.2 Mbps

3.5 Mbps

2.1 Mbps

201-600 Users

26 Mbps

6.5 Mbps

10.6 Mbps

6.5 Mbps

 

▪Available Internet bandwidth.

▪In an environment made up of various plants accessing SoftExpert Suite remotely, each plant must consider the number of local users; whereas the plant in which SoftExpert Suite installation is located must consider the sum of users from the remote plants.

▪For SoftExpert On Demand customers, consider this requirement only in the access source.

The required configurations to enable SoftExpert Suite data compression may be found in the SoftExpert Suite - Installation Guide (Linux or Windows).